INM-D Series

Twin Head Mounted In-Line Pumps


Description :


  • INM-D series twin head mounted, in-line type centrifugal pumps.
  • Formed by jining two standard INM series pumps with collector parts.
  • Special design composed of a common collector and integrated check valves at each pump exit that provides forn independent operation.
  • In case of failure of the pump the second pump goes into operation, so the process does not come to a halt.
  • Single suction, closed type impeller is equipped with rear rings to balance thrust and is dynamically balanced.
  • Maintenance-Repair processes are very easy due to the back pull-out design.
  • Standart asynchronous motors are used to set pump in motion.
  • The pump shaft is coupled with the motor shaft by means of a special clamp. This coupling makes it easy to dismantle the pump without removing the motor.
  • HVAC systems
  • Industrial plants
  • Swimming pools Horizontal High Pressure Multistage Centrifugal Pumps
  • Geothermal plants

Technical Specifications :



Flow Rate (m³/h) : 2 ... 280
Head (m)  : 2 ... 16
Operating Pressure (bar) : 10
Operating Temperature (°C) : -25 ... 120
Motor Speed ​​Range (d/d) : 900 ... 3600
Suction Flange : DN 40 ... DN 150 (DIN 2533)
Discharge Flange : DN 40 ... DN 150 (DIN 2533)