KDM Series

Horizontal High Pressure Multistage Centrifugal Pumps

KDM Serisi

Description :


  • KDM series are non-self priming, horizontal, ring portions radially divided, multistage centrifugal pumps.
  • Impeller is between bearings; it is single-entry, closed impeller and dynamically balanced.
  • There is a balancing drum at discharge side to balance axial load.
  • The pump and motor is fixed on the same chassis and are connected via a flexible coupling to each other.
  • Suction and discharge press nozzles can be selected in different 90° positions.
  • Specially designed fans provide extra cooling to the bearings.
  • Bearings lubricated by the liquid.
  • Axial loads balanced with balancing drum and thus seal pressure is decreased. High efficiency has been achieved due to the low leakage flow.
  • There is a level indicator for oil level in the bearing housing.
  • There is thermometer to see the oil temperature while running.
  • Emergency measures for both oil and temperture levels.
  • Angular contact ball bearings are used. These bearings have a longer life even under extreme working hours.
  • Soft packing or mechanical seal is used for sealing.
  • Power plants 
  • Pumping clean and sligghtly contaminated fluids
  • Boiler feed and condensate transfer
  • Central heating systems
  • Water supply system
  • High-rise buildings and industry booster sets
  • Water purification
  • Industrial washing system
  • Sanitary and cleaning facilities
  • Industrial applications and utilities
  • Water delivery services
  • Shipbuilding, mining, filter units

Technical Specifications :


Flow Range (m3/h) : 0-100 
Manometric Head (m) : 900 
Operating Pressure (bar) : 90
Operating Temperature : up to 150ºC
Speed (rpm) : ​​2900 
Suction Flange : DN 65-DN 80
Discharge Flange : DN 50-DN 65
Max Stage Number : 18