KME Series

Horizontal High Pressure Multistage Centrifugal Pumps


Description :


  • KME series pumps have horizontal axis, radial separable body and are multistage centrifugal pumps that can be dismantled in stages.
  • Closed type impellers are situated between bearing and are balanced dynamically.
  • Impeller balance is achieved with back wear rings and balance holes. A balance disc or drum can be used for very high pressures.
  • KME series includes 5 types depending on stage number, roation speed, maximum flow rate attaned and vary between 2-15 stages.
  • In standard manufacture, the pump and the motor are connected by means of a flexible coupling on a single base  plate. In standart assembly the discharge port is at the other side with flange oriented towards the left. Alternative  Designs can be obtained upon request.
  • Suction and discharge flanges can be situated on the left, right and on the top. On special order, the suction flange can be positioned at the motor end. In that case motor rotation would be in a counter-clockwise direction.

In pumping of pure or relatively clean liquids in:

  • Pumping stations.
  • Water supply in high buildings
  • Water treatment systems
  • Industrial washing processes
  • Fire fighting systems
  • Boilers and condenssation process
  • Health and hygienic processes
  • Industrial and public applications
  • Water distribution systems
  • Marine, metallurgy, energy sectors
  • Irrigation systems

Technical Specifications :


Flow Rate (m³/h) : 25 ... 800
Head (m) : 25 ... 500
Operating Pressure (bar) : 40
Stage Number : 2 ... 15
Motor Speed ​​Range (d/dk) : 1450 - 2900 
     2900 – 3600 d/dk for KME 80
Suction Flange : DN 100 ... DN 250 (PN 16)
Discharge Flange : DN 80 ... DN 200 (PN 40)