UKM-S Series

Self-Priming Centrifugal Pumps

UKM-S  Series

Description :


  • UKM-S series pumps are self-priming centrifugal pumps with upper suction flap.
  • Since they are self-priming pumps it is only necessary to place the end of the suction pipe  into the liquid to be pumped.
  • A flexible coupling or a V-belt pulley can be used to startup the pump directly in the case of a Diesel or an electric motor.
  • UKM-S Series consist of 6  different types; 2", 3", 4", 6", 8", 10".
  • The impellers are two-vane, open type and can pump up to 76 mm (3") solid particles depending on the size of the pump.
  • The suction cover can be removed from the front, making it easy to reach the impeller. Any obstruction can be removed without touching the suction and discharge parts.
  • The flap connected to the suction flange has been specially designed so that is possible to clean or to remove and install the flap without touching the suction system.
  • The rollerbearing ( bearing bushing) is supported by the pump body. There can be no problem in speed up.
  • UKM series pumps are very easy to use because they are of self-priming type. Once the suction pipe is placed into the liquid the pump starts to function in one minute maximum depending on the suction height.
  • Pumping of residental and industrial crude sewage liquids.
  • Sewage treatment installations
  • Pumping of liquids containing sludge and solid particles
  • Pumping of waste water from factories
  • For use in all kinds of drainage and discharge systems.

Technical Specifications :



Capacity (m³/h) : 10…800
Total Head (m) : 4…40
Operation Pressure (bar) : 6
Operation Temperature (°C) : 60
Motor Speed Range (d/d) : 650…2900
Suction Flange : DN 50... DN 250 (2"...10")
Discharge  Flange : DN 50... DN 250 (2"...10")